Stahl 8562/5, Руководство по эксплуатации

Страница: 26 / 32

Commissioning
10 8562606300
S-BA-8562-02-en-24/08/2007
Residual current circuit-breaker with
integral overcurrent protection 8562/5
8.3 Connection diagrams
The device may be connected from the top or the bottom side. It has to be taken care that
the neutral conductor is connected correctly.
9 Commissioning
Before commissioning, ensure that:
X
the device has been installed in accordance with the standards,
X
the connections have been correctly made,
X
the device is not damaged,
X
all screws and nuts are fully tightened.
10 Servicing
10.1 Maintenance
The following items must be checked as part of the maintenance schedule:
X
Check that no cable connections are loose.
X
Check the plastic enclosure for cracks or other visible signs of damage.
X
Check that the permitted temperatures, in accordance with EN 50014, are adhered to.
X
Check the reset function of the switch lever.
X
Check that the device functions correctly.
Maintenance Intervals
Check explosion-protected components regularly to ensure that its fitting, installation and
operation are in accordance with the regulations.
Refer to the corresponding national regulations (e.g. EN 60079-14) for the type and
scope of tests. The maintenance intervals must be chosen, such that the occurrence of
deficiences, anticipated in the system, can be avoided.
07606E00
07621E00
07617E00 07618E00
1-pole + N 2-pole Auxiliary contact 1 W Fault indication contact 1 W
Maintenance and repair work on the devicess may only be carried out by appropriately
authorized and trained personnel.
Before any work commences, the devices must be disconnected from the supply.
)
Observe the relevant national regulations in the country of use!