202161 / 815060300020
2016-12-13·BA00·III·en·05
Transport and storage
7
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Terminal Box
Series 8150/1, Series 8150/2
3.3.2 Risk of injury
Falling devices or components
The heavy device or components can fall during transport and mounting, causing severe
injury to persons in the form of bruises and contusions.
Use transporting and lifting equipment suitable for the size and weight of the device
when transporting and mounting it.
Observe the weight and the maximum load-bearing capacity of the device;
see specifications on the packaging.
Use suitable mounting hardware for mounting.
Electric shock
During electric installation, operation and maintenance, there will at times be high voltages
present at the device. Persons coming into contact with electric lines carrying excessively
high voltage can suffer severe electric shocks and consequently injuries.
Operate the device only on equipment with the internal voltage specified in the "Technical
data" chapter.
Connect electric circuits only to suitable terminals.
4
Transport and storage
Transport and store the device carefully and in accordance with the safety notes
(see chapter 3).
5
Product selection, project engineering and modification
DANGER! Explosion due to damaged seal in devices with enclosure hinges!
Non-compliance results in fatal or severe injuries.
Devices with enclosure hinges must be transported only with a transport lock.
DANGER! Explosion due to subsequent, complete painting of the device!
Non-compliance results in fatal or severe injuries.
Do not paint the device.
Consult with R. STAHL before mending flaws such as scratches.
DANGER! Explosion due to defective sealing of the device!
Non-compliance results in fatal or severe injuries.
Fit plates (on the outside) only without drilling any additional holes.
Only drill additional holes exactly in accordance with the instructions in the
"Mounting" chapter. Consult with R. STAHL first if there are any discrepancies
or uncertainties.
Equip the enclosure only with equipment (e.g. cable entries, stopping plugs,
drain and breather valves) that is verifiably approved for use in hazardous areas.
Examples: EU Type Examination Certificate or IECEx Certificate of Conformity
Seal unused cable entries with certified plugs (red).
Seal all open drilled holes by means of suitable equipment.
