200128 / 8006603300
2017-04-18·BA00·III·en·08
Mounting and Installation
9
Load and Motor Switch / Control Switch
Series 8006/4
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Mounting the covers
IP20 cover:
Engage the IP20 covers (1) in the contact. Insert the designation plate (4) in the groove
of the IP20 covers (1).
Ex i cover:
Engage the Ex i cover (3) in the contact. Engage the Ex i lid (2) in the Ex i cover (3).
Insert the designation plate (4) in the groove of the Ex i lid (2).
15088E00
7.3
Installation
WARNING
Danger due to live components!
Risk of severe injuries!
• All connections and wiring must be disconnected from the power
supply.
• Secure the connections against unauthorized switching.
WARNING
Install the device in an enclosure!
Explosion protection is impaired !
• The device must be installed in an enclosure that fulfills the
requirements of a recognized type of protection according to
IEC/EN 60079-0.
WARNING
Observe clearance and creepage distances!
Explosion protection is impaired !
• During installation of the devices in an enclosure of the protection
type increased safety "e" according to IEC/EN 60079-7,
the clearance and creepage distances must be adhered to.