Stahl 6118/1 Series, Руководство по эксплуатации

Страница: 29 / 31

251986 / 6118602300
2019-03-07·BA00·III·en·03
Cleaning
29
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Compact Sheet-steel
Emergency Light Fitting
Series 6118/1
11.3.2 Battery replacement
11.4 Returning the device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
• Contact customer service personally.
or
• Go to the r-stahl.com website.
• Under "Support" > "RMA", select "RMA - REQUEST".
• Fill out the form and send it.
Confirmation will be sent. R. STAHL's customer service will contact you.
You will receive an RMA form after speaking with customer service.
• Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
12 Cleaning
• Clean the device only with a cloth, brush, vacuum cleaner or similar items.
• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
• Do not use aggressive detergents or solvents.
18459E00
• Loosen the screws (3) of the battery.
• Remove the battery (2) with the plug (1).
• Insert the new battery. The battery plug (1) has a
polarity reversal protection and can only be
inserted one way.
• Fasten the battery with the screw (3) (tightening
torque 2 Nm).
1 2 3