17
s
MOUNTING INSTRUSTIONS
5000 SERIES OWNER’S MANUAL
12.
The suction line from tank to pump should be a minimum of one-inch (1”) diameter. The pressure line from
the pump to the relief valve must be a minimum of one-half inch (1/2”) diameter hose - SAE100R2. The
connection at the relief valve is a one-half inch, 37 degree (1/2”-37°) JIC male fitting.
s
does not supply
these two (suction & pressure) lines.
13.
The proper length hoses are supplied with the crane for hookup to the reservoir. Both the pressure and return
lines in the crane are one-half inch, 37 degree (1/2”-37°) JIC. If the reservoir is mounted in a location other
than the right rear compartment, additional hoses will need to be made. The crane pressure line (running up
the center to revolving connections) connects to a fitting on top of the relief valve. The crane return line
(coming from the rotation valve) connects to the one-half inch (1/2”) JIC fitting between the relief valve and
return line filter.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com
