Mounting and installation
22
282892 / 652560300080
2020-12-10·BA00·III·en·01
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Floodlight LED
Series 6525/2
7.3.3 Cable entries
Luminaires with cable entries, cable glands and stopping plugs which are not supplied by
R. STAHL Schaltgeräte GmbH
Please observe the following:
• the required dust resistance!
• the required type of protection!
• the required temperature resistance!
• the IP degree of protection according to the rating plate!
• the operating instructions of the cable entries and stopping plugs!
• the required tightening torques!
• the range of the permissible cable diameter!
• Insert the metal cable entries and/or stopping plugs into the PE!
Recommendation
Use the following cable glands:
• 243464 – CMP-20A2F NB M20 screw connection
• 107642 – CMP-25A2F NB M25 screw connection
DANGER
Explosion hazard due to impermissible cable entries, cable glands and
stopping plugs!
Non-compliance results in severe or fatal injuries.
• Only use separately certified cable glands and stopping plugs which
have been tested and certified according to Directive 2014/34/EU
(ATEX) or IECEx (CoC) and which comply with the standard version
stated in the certificate of the luminaire.
DANGER
Explosion hazard if breathers are used!
Non-compliance results in severe or fatal injuries.
• Do not use breathers for series 6525/21 (nR version).
Cable glands and stopping plugs must be approved for the following types of
protection:
a) restricted breathing (nR) and dust (IIIC) for series 6525/21 (nR version)
b) increased safety (e) and dust (IIIC)
