Stagg S MiX 2M2S UF, Руководство пользователя

Страница: 6 / 8

6 7
12. MAiN output control
This slide fader determines the final output level sent to the main output sockets.
13. USB port (2M2S UF model only)
This unit has a built-in music player. Insert in this USB port any memory stick containing songs to
be played through this device.
14. Controls for built-in player (2M2S UF model only)
These commands allow you operate the built-in player.
15. display for built-in player (2M2S UF model only)
This LCD display shows the current status of the built-in player.
1. 17.5V x 2 AC Power Supply Socket
This AC power supply socket is where you plug in the adapter provided (do not use any other adapter).
2. AC Power Switch
Use this switch to turn on or off the AC power.
7A. 2TK TO MAiN (2M2S F model only)
The input signal from the 2TK sockets can be fed to the main bus when this switch is pressed down.
7B. 2TK/MP3 TO MAiN (2M2S UF model only)
For the 2M2S UF model, this control determines the signal level to be fed to the main bus from the USB
port and the 2TK sockets. Please turn off this control when you are not using the USB port or the 2TK
signals.
8. 2TK TO PHONES
Press down this switch for the headphone monitor the play the signal; release this switch to feed the
main output of the left and right channel signal to the headphone monitor.
9. PHONES
This controls the signal level to the control room / headphones.
10. POWER
Indicator Indicates the status of the internal DC power supply.
11. Output Level meter
This level meter indicates the signal level of the stereo main output (Left and Right) or play input
REAL PANEL SECTiON
MASTER CONTROL SECTiON