Stagg ECOPAR2, Руководство пользователя

Страница: 7 / 16

Operating Instructions
Addr - DMX Address Setup
•
Press MENU, then Up or DOWN until "Addr" is displayed, then press ENTER
•
Change the DMX address by pressing UP or DOWN
•
Press ENTER to save the DMX address
Auto - Automatic Programs Setup
•
Press MENU, then Up or DOWN until "Auto" is displayed, then press ENTER
•
"Autx" will now be displayed. Choose your desired program by pressing UP or
DOWN. Press Enter to select the program
•
"SPx" will now be displayed. Choose the running speed for the program by
pressing UP or DOWN
Colo - Preset Colors Setup
•
Press MENU, then UP or DOWN until "CoLo" is displayed, then press ENTER
•
Either “CoL X”, “X” representing a number between 1 - 9 or “AtF ” will be
displayed. Press UP or DOWN to select a preset color, press ENTER to confirm.
•
Select "AtF" and press ENTER to enter "AtF" mode which lets you mix your
own color. Enter the desired amount of Red into "rxxx", press ENTER, the
desired amount of Green into "Gxxx", press ENTER, the desired amount of
Blue into "bx xx", press ENTER. You can adjust the amount with the UP and
DOWN buttons.
C h n d - DMX Channel Modes
•
Press MENU, then UP or DOWN until "Chnd" is displayed, then press ENTER
•
"X Ch" will now be displayed. "X" represents the DMX mode you have
selected (see DMX channel charts for reference). Choose your desired DMX
mode with UP or DOWN and press ENTER to confirm.
S oun - Sound Control Setup
•
"Soun" will now be displayed. Choose your desired Sound Controlled Program
by pressing UP or DOWN. Press Enter to select the program.
•
"SouX" will now be displayed, X being a number from 1 to 9. Using UP or
DOWN you can adjust the sensitivity of the internal microphone.