OPERATING INSTRUCTIONS
Thank you for purchasing our Flanger Pedal.
Before operating this product, please
read the enclosed Operation Instructions
1
2
7
4
6
3
5
9
8
1. True BYPASS Footswitch
Push down on the footswitch to switch between effect
and bypass status.
2. LED Indicator
On: effect is active. Off: bypass mode is active.
3. RATE
Adjusts the flange rate. Turn clockwise to increase,
and anti-clockwise to decrease.
4. RANGE
Controls the range of flange sweep.
5. COLOR
Controls the depth of the flange sweep.
6. FLANGER SWITCH
Switch between ‘normal’ and ‘filter’ sweep.
7. INPUT
Connect your guitar or other effect unit to the standard
Ø 6.3 mm INPUT jack of the pedal.
8. OUTPUT
Connect the output of your pedal to your amp
or other effect unit using the standard Ø 6.3 mm
OUTPUT jack.
9. 9V POWER ADAPTER INPUT
Connect your 9V DC regulated power supply adapter
plug here (negative polarity) (not included).
!
Use only the specified AC adaptor and connect
it to an AC outlet of the correct voltage.
Do not use any other AC adaptor, since this
may cause malfunction.
