8
Set Up
1.
Open the shipping carton and carefully remove the unit from the
shipping carton;
2.
Be sure to remove packing material from around the
haze
machine,
especially near the nozzle;
3.
Set the
haze
machine on a dry, flat surface;
4.
Connect the quick connector with the liquid tank cap (Figure 1-C).
Be sure of well connection. Use definitely water based liquid of
good quality;
5.
Plug mains power cord from the
haze
machine into appropriate
power supply socket. Wait about 40 seconds for heating element to
heat up;
6.
Use LED display for operating control, or connect DMX controller
for setting;
7.
Moving the machine during operation could probably get air
entered into the liquid pipe and affect smoothness of fog blasts.
If
this happened, press the “Manual Fog” button to fog for a
moment. Until the air is dispersed from the pipe, the machine will
recover its normal fogging.
