Stage4 LEO BEAM 180, Руководство пользователя

Страница: 2 / 7

Technology Reference:
Thank you very much for choosing our product. For safety purpose, please read this manual carefully before your opera on. This
manual included installa on and using informa on. Please install and operate it according to this manual.
џ
Pan::540° Tilt: 222°
џ
Voltage: 100-240V,50-60Hz
џ
LED: ultra bright 180W LED
џ
Effect wheel:8 facet prism and 16 facet prism, adjustable rota ng speed and direc on, the two prism can overlap.
џ
Beam angle:6
°
џ
Focus: Variable motorized focus
џ
Dimmer/Strobe: Dimmer, 0-20Hz/s
џ
Fixed gobo wheel: 8 fixed gobos+open, gobo flow effect
џ
Color wheel: 7 white, split colors, rainbow effect
џ
Rotated gobo wheel: 3 glass gobos + 3 metal gobos+open, gobo flow effect, gobo shake
џ
Power consump on: 250W
џ
Other func on: Pan/Tilt speed adjustable
џ
Power cable: 1PCS
џ
N.W.: 10.6KG
Accessories:
џ
Working mode: Stand-alone mode, Controller mode, Master/Slave synchroniza on mode
џ
Control: DMX 512,13CH / 17 CH
џ
Housing: High temperature resistant engineering plas c + aluminum alloy.
The accessories below were packed with product, please check if they are once open the package.
џ
Per packing size: 415*350*350mm
E (ground) = yellow/green double color line
Important!!
This product is designed for Indoor use, the IP rate is IP20. Keep the product in dry environment. Avoid in damp, overhea ng,
or much dusty environment. Prevent fixture in contact with the water and other liquids.
Equipped with insurance rope connec ng hole at the bo om of the fixture, for security, please use safety cable to hang the
fixture.
Do not use the fixture is directly projected on combus ble objects, the distance between the fixture and light objects please
keep over 1 meter.
џ
Clamp (Op onal): 2PCS
Please do not install the fixture on the surface of combus ble substances.
If you have any ques ons or Sugges ons, please contact with dealers or supplier.
Please check whether the light with damage by shipment once open the package before opera on. If product with damage by
shipment, please do not operate the light then contact the dealer or supplier.
Please do not open and fix the fixture by yourself.
Every fixture should be properly grounded and in accordance with the relevant standard for electrical installa on.
Keep the bulb clean, do not contact with the glass bulb by hand directly.
Don't look straight into the light source of the fixture (especially for epilepsy pa ents), so as not to cause damage to the eyes!
Don't dispatch the fixture connected to any other dimming device.
The fixture should be installed in a well ven lated place, and the distance from the wall to keep above 10 cm, at the same
me, please check the fan and the vent is unimpeded.
џ
XLR cable: 1PCS
N =(middle line) blue line
Before installa on, please make sure the power supply voltage you used and the voltage of fixture is iden fied.
There is no any parts for repair inside the fixture. Before star ng opera on of the fixture, please check whether all the cover
plate (or housing) has been installed well, whether the screw has been ghten .
For electrical parts connected person must have the corresponding qualifica ons before operate.
Do not use insula ng layer with damage for the power cord, and don't take the power cord overlap on the other wire. When
not use or to clean the fixture, please unplug the power cord. Don't unplug the plug rudely or drag the power cord directly.
The power cord connec on as follows:
Power supply connec on
Before any installa on, maintenance and clean the fixture, please confirm the power supply is cut off!
џ
User manual: 1 PCS
L = (live wire) brown wire
Prohibit use the fixture when the cover plate or housing is opened.
Qualified professionals can install, operate and maintain the fixture, and to make sure strictly in accordance with the
procedures described in this opera ng instruc ons.
Warning!!!