background image

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to these 
safety warnings and guidelines. Please keep this manual in a safe place for future reference. 

 

This device is intended for indoor use only. 

 

Do not expose this device to water or moisture of any kind. Do not place drinks or 
other containers with moisture on or near the device. If moisture does get in or on 
the device, immediately remove it from its power source and allow it to fully dry 
before reapplying power. 

 

Do not touch the device, the power cord, or any other connected cables with wet 
hands. 

 

If operating this speaker in a humid environment, ensure that no condensation 
occurs. Condensation could cause damage to the speaker cone and could cause a 
short in the amplifier, which in turn could cause fire or severe electric shock. 

 

Do not install this device on an unstable surface where it could fall and cause either 
personal injury or damage to the device and/or other equipment. 

 

Do not expose this device to excessive vibration, extreme force, shock, or 
fluctuations in temperature or humidity. 

 

Do not expose this device to excessively high temperatures. Do not place it in, on, 
or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in 
direct sunlight. 

 

Do not place or install this device in an area where it can be exposed to excessive 
amounts of dust, humidity, oil, smoke, or combustible vapors. 

 

Prior to operation, check the unit and power cord for physical damage. Do not use if 
physical damage has occurred. 

 

Before plugging the unit into a power outlet, ensure that the outlet provides the 
same type and level of power required by the device. 

 

This device uses a grounded power cord and requires a ground connection for safe 
operation. Ensure that the power source has a proper ground connection. Do not 
modify the plug or use a "cheater" plug to bypass the ground connection. 

Содержание SRD210









Отзывы: