Stage right 625921, Руководство пользователя

Страница: 16 / 23

16
SETUP
Perform the following steps to prepare the drum kit for use. Ensure that all external
equipment to be connected is powered off and disconnected from its power source.
1. If you want to use a Drum Amplifier, plug one end of a 3.5mm audio cable (not
included) into the OUTPUT jack on the Host Machine, then plug the other end into
the input on the amp. Alternatively, plug a pair of headphones (not included) into
the HEADPHONES jack on the Host Machine.
2. If you want to use an external synthesizer or PC, plug one end of a USB cable (not
included) into the USB jack on the host machine, then plug the other end into the
synthesizer or an available USB port on your PC.
3. Plug the included AC Power Adapter into the DC9V jack on the Host Machine, then
plug the adapter into a nearby AC power outlet.
BASIC OPERATION
•
Momentarily press the POWER button to turn the system on. Press and hold the
POWER button for several seconds to turn the system off.
•
With the system powered on and the metronome off, press the UP and DOWN
buttons to cycle through the twelve Drum Sounds. The DISPLAY will show which kit
is selected.
•
With the system powered on, momentarily press the METRONOME button to turn
the metronome on into the default Tempo Mode.
•
With the system powered on and the metronome on in Tempo Mode, press the UP
button to increase the tempo or press the DOWN button to decrease the tempo.
•
With the system powered on and the metronome on in Tempo Mode, press and
hold the METRONOME button for three seconds to enter Beat Mode.
• With the system powered on and the metronome on in Beat Mode, use the UP and
DOWN buttons to select one of the 8 beats. The DISPLAY will show which beat is
selected.