13
3.
Use the
▲
/
▼
buttons to change the displayed FREQUENCY.
4.
When the desired FREQUENCY is displayed, press the SET button
to save the displayed FREQUENCY. The FREQUENCY display will
stop flashing.
Automatically Setting the Receiver Frequency
You can manually set the frequency used to communicate with the
Handheld Microphone or Bodypack Transmitter, or you can automatically
scan for an available frequency. The latter is useful when using multiple
Receivers. Perform the following steps to automatically set the frequency.
1.
If the Receiver is not already powered on, momentarily press the
POWER button to turn it on.
2.
Press the SET button two times. The FREQUENCY display will
change to show SC.An.
3.
Press the
▲
button start scanning for an available frequency.
4.
When an available frequency is found, the display will change to
show the FREQUENCY flashing. Either press the SET button to save
the displayed FREQUENCY or press the
▲
button again to
continue scanning. When the FREQUENCY is saved, the
FREQUENCY display will stop flashing.
