10
3.10 Cradle installation
It is suggested that the vacuum cleaner’s brush set can touch floor surface in a proper position.
Therefore, the cradle’s position is recommended with the same height as the cleaners straight
height from floor surface. Fix the cradle on the wall with provided screws and expansion pipes
(Don’t hang the cleaner in air without touching floor because it may cause damage)
Note: Ensure no pipe work (gas, water, air) or electrical cables, wires or ductwork are located
directly behind the mounting area. The docking station must be mounted in accordance with
regulations and applicable codes/standards (state and local laws may apply).
3.11 Disassemble B-Mattress brush set
Press Release Button of the tube to release the brush set, then take it off from the cleaner’s head.
