IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note of all warnings listed in
these instructions and on the unit.
1.
Water and Moisture
– The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
2.
Ventilation
– The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
similar surface that may block ventilation openings. Also, it should not be placed in a built-‐in
installation, such as a bookcase or cabinet, which may impede the flow of air through the
ventilation openings.
3.
Heat
– The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat. It should also be kept out
of direct sunlight on Hot Days.
4.
Power Sources
– The unit should be connected to a power supply of the type described in
the operating instructions or as marked on the appliance.
5.
Power Cable Protection
– Power supply cables should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them. It is always best to have a
clear area from where the cable exits the unit to where it is plugged into an AC socket.
6.
Cleaning
– The unit should be cleaned only using a warm damp cloth. Do not use solvents,
etc.
7.
Objects and Liquid Entry
– Care should be taken so that objects do not fall and liquids are
not spilled into any openings or vents located on the product.
8.
Attachments
– Do not use attachments not recommended by the product manufacturer.
9.
Lightning and Power Surge Protection
– Unplug the unit from the wall socket and
disconnect the antenna or cable system during a lightning storm or when it is left
unattended and unused for long periods of time. This will prevent damage to the product
due to lightning and power-‐line surges.
10.
Overloading
– Do not overload wall sockets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
11.
Damage Requiring Service
– The unit should be serviced by qualified service personnel only.
For service contact our technical service department
12.
Periods of Nonuse
– If the unit is to be left unused for an extended period of time, The
power cable should be unplugged from the unit to prevent damage. Unlike other portable
PA systems on the market, this system uses a Lithium Ion battery rather than a Lead acid
battery. It does not need to be charged when not in use.
13.
Servicing
– The user should not attempt to service the unit beyond those methods described
in the user’s operating instructions. Service methods not covered in the operating
instructions should be referred to qualified service personnel.
