Page | 10
9. Conduit landing plates are located toward the rear of the cabinet on the top cover,
side panels, and base to accommodate bottom wire entry to the cabinet (see
Figure 1
). Remove plates and drill or punch hole to fit conduit bushing with
Greenlee punch or similar device. Make certain that the bushing will be clear
in the opening in the base. Mount bushing to plate and tighten to
manufacturer’s recommendations. Replace the plates and mount conduit.
CIRCUIT BREAKERS
BATTERY TRAYS
U1
R3
R2
R1
Q1
J3
J2
J1
F1
D2
D1
DANGER
RISK OF ELECTRIC SHOCK
Do not touch uninsulated
battery terminals.
CAUTION!
WARNING!
TO REDUCE RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE
AND RATING OF FUSE.
DANGER
RISK OF ELECTRIC SHOCK
Do not touch uninsulated
battery terminals.
CAUTION!
DANGER
RISK OF ELECTRIC SHOCK
Do not touch uninsulated
battery terminals.
CAUTION!
DANGER
RISK OF ELECTRIC SHOCK
Do not touch uninsulated
battery terminals.
CAUTION!
DANGER
RISK OF ELECTRIC SHOCK
Do not touch uninsulated
battery terminals.
CAUTION!
DANGER
RISK OF ELECTRIC SHOCK
Do not touch uninsulated
battery terminals.
CAUTION!
BATTERY FUSES
Figure 4 - Front Internal View
