Stack ST8956, Дополнение к руководству пользователя

Страница: 14 / 18

Chapter 4. Using the WiFi Recorder
10 ST8956(W) WiFi Recorder Users Guide Addendum
Chapter 4. Using the WiFi Recorder
Configuring the system
Before using the WiFi Recorder it must be configured to work
with the sensors and optional parts you have installed. This is
performed using the DataPro Designer program in the same
manner as the ST8956 Multi-Function Recorder.
! Configurations must only be uploaded from DataPro Designer
using the CAN-USB cabled connection. Configurations cannot
be uploaded via the WiFi Connection.
DataPro to WiFi Connection
Before communication between DataPro and the WiFi Recorder
can take place the WiFi connection must be configured on your
PC. This is described in the DataPro WiFi Guide supplied.
Once the WiFi connection has been established the WiFi
Recorder must be Authorised and then Registered in DataPro as
described in that User Guide.
! These operations MUST be performed using the wired CAN
connection and NOT via the WiFi connection.
Finally, the Active Connection must be selected for your WiFi
Recorder. All of DataPro’s Recorder menu items will use that
Active Connection to communicate with the WiFi Recorder.
This also applies to the Calibrate, Chat and Upload items within
DataPro Designer.
! Active Connections for WiFi Recorders which are out of range
are shown in red and cannot be selected. When a WiFi
Recorder comes into rang, its list item will change to black.