Stack ST8110, Дополнение к руководству пользователя

Страница: 12 / 23

Chapter 3. Operating the Display System STACK ST8110 Display System
6 User Guide Addendum
Chapter 3. Operating the Display System
The operation of the ST8110 is basically the same as that of the ST8100.
This section highlights any differences.
Changing the display layers
The ST8110 has four standard display layers. Layer 1 differs slightly
from the standard ST8100 and is shown below.
Each of the display layers can be displayed in turn by pressing switch 3.
Press switch 3 when displaying last layer to return to display layer 1.
ð
The format of the values in these displays will vary for systems
supplied outside the UK, as the parameters are displayed in
different units.
Display Layer 1
Display layer 1 shows:
•
Water Temperature (WATER)
• Boost Pressure (BOOST)
Note: This illustration shows the Boost Pressure in Bar. In
all units this can also be shown in either Bar or psi - refer to
Chapter 4. Configuring the Display System. The number