• Depends on final host configuration additional authorization requirements for
the non-transmitter functions on the transmitter module may be required (i.e.,
V
erification, or Declaration of Conformity) OEM integrator is responsible for
ensuring that after the module is installed and operational into the host, it
continues to be compliant with the Part 15B unintentional radiator
requirements.
• The information on label and user manual is required to be incorporated in the
user manual of the final system. see 47 CFR15 requirements for more details
(e.g. 15.19 / 15.21 / 15.101 / 15.105 / RSS-GEN / ICES)
• Additional label with the words ‘Contains FCC ID:2A
IWWPD-V8
and ‘Contains
IC:20845-S
T
ACK102
’
shall be applied and visible from the outside of the end
product.
• The module must be installed and used in strict accordance with the
manufacturer
’
s instructions as described in the user documentation that
comes with the product.
• The antenna of the module may not be removed, replaced nor modified. The
antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. No additional antenna must be used.
20X12mm
Microwave Sensor
IC:20845-STACK102
FCC ID:2
AIWWPD-V
8
MODEL:
PD-V
8
Microwave Sensor
IC:20845-STACK102
FCC ID:2A
IWWPD-V
8
MODEL:
PD-V
8
