HOW TO LOCK
1. Close the door.
2. Turn the handle to the locked position.
3. Turn the dial either direction a few rounds.
1st
70
50
30
3 times
twice
once
2nd
3rd
Example: If the dial combination numbers were 70 - 50 - 30
1. Turn the Dial clockwise passing the first
combination number twice landing on the
number the third time.
2. Now turn the Dial counterclockwise, passing the
second combination number once landing on
the number on the next time around.
3. Turn the Dial clockwise until you reach the third
combination number.
4. The handle should now be released. Turn the
handle clockwise. Pull the door towards you.
All numbers must be dialed exactly. If you pass a
number, you can not back up. You must start over.
All numbers are to be dialed to the Top Notch located
on top of the dial ring (the 12 o'clock position).
Your Combination Number
1st
3 times (R)
2nd
2 times (L)
3rd
1 time (R)
SAFE COMBINATION INSTRUCTIONS
2 14
IMPORTANT:
Your safe is delivered with a Safety
Interlock Screw which must be removed
in order for you to lock your safe.
Failure to do so will compromise the
safety and security of your safe.
First open the safe by turning the handle
clockwise and pulling the door open.
Locate the Safety Interlock Screw on the side of
the door; unscrew with a Phillips screwdriver,
remove and discard the screw.
Your safe can now be closed and locked. Do not
lock your instruction manual in the safe. You will
need this manual for the instructions on locking
and unlocking the safe.
Safety Interlock Screw
40653-2203
