NOTE: This safe is designed to be mounted to
a shelf. Attaching the safe with a cable to a
fixed object, as the sole means of securing the
safe, will compromise the safety and security
of the safe.
SELECTING A LOCATION
IMPORTANT
Keep keys in a secure place, away from children.
Keep this record of your serial number in a secure
place separate from your safe. To order a replacement
key set, follow the instructions on the attached form.
To secure the case to a fixed object, loop the
cable around the object and place the cable’s
small end into the key hole on the side of the
safe while the drawer is open. Locking the
drawer will secure the cable end in the safe.
SECURING THE SAFE WITH THE CABLE
SECURING THE SAFE WITH HARDWARE
Using the template, mark the holes to be used.
Drill 3/16” diameter pilot holes.
Install the rear screws so there is just enough
room between the head of the screw and the
mounting surface for the key slots. (Figure 2)
Slide the unit into place and secure the front
mounting holes with the screws and washers.
(Figure 3)
40789-1806
5 14
FIGURE 2
The safe must be mounted to a shelf. For optimal
safety and security, the safe should be installed
in an isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
REINSTALLING THE DRAWER
To reinstall the drawer, align the drawer slide
members and push the drawer in until it locks in
place.
NOTE ON LOCKING THE SAFE: The safe needs to
be in an upright position, as shown in figure 1,
for the locking mechanism to function properly.
Failure to mount the safe in the corrrect
upright position will compromise the safety
and security of the safe
NOTE: This safe must be mounted to a shelf.
Failure to do so will compromise the safety and
security of the safe.
Do not use glass cleaners or sprays on this safe.
Clean with a damp cloth.
MAINTENANCE
FIGURE 3
FIGURE 1
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
© 2018
STACK-ON PRODUCTS
