GETTING STARTED
INSTALLING THE BATTERIES
When you first receive your case you will need to
open the cover with the key in order to install the
batteries. Batteries are included and are located
inside the case.
Pull the foam upward and away from the battery
compartment. Remove the battery compartment by
pushing the tab and pulling the compartment out as
shown. Install (4) AAA alkaline batteries as shown.
Reinstall the compartment by hooking the back end
in place and snapping shut. CAUTION: Be careful
not to pinch any wires while reinstalling the battery
compartment.
NOTE: If the batteries are low the combination
buttons will flash red when pushed. Replace the 4
AAA batteries with new alkaline batteries as
described below.
NOTE: This key has also been provided if you lose
or forget your security code or the batteries run
low. If you lose your key, you may purchase a
replacement key by referencing the serial number
located on the back of the case. See section
regarding replacement keys for further
information.
To open the case, insert key into lock and turn
counterclockwise until the cover automatically
opens.
NOTE: You must turn the key back to the
locked position before you are able to close and
lock the cover.
NOTE: Do not mix old and new batteries. Do not
mix alkaline, standard or rechargeable batteries.
OPEN
CLOSE
40656-1512
2 12
