-
15
-
(c)
HDD Overwrite
(d)
HDD
5.3.1 Record Time
Recorded video is sliced into smaller video files for better storage management. Default value is 5
Minutes for each file.
1.
Press [ENTER] button to start
2.
Use [UP / DOWN / LEFT / RIGHT] button to select file length
3.
Press [ENTER] button to confirm or [MENU] button to exit
5.3.2 Date Stamp
Enable/disa
ble “Date/Time” stamp on Live View screen. Default is “ON”, date and
time are shown at the lower left corner of each camera channel.
To change the setting:
1.
Press [ENTER] button to go into “Date Stamp” menu. Default value in “ON”
marked with RED tick under the ON label
2.
Use [LEFT / RIGHT] button to select turn “ON” or “OFF” date stamp in Live
View, press [ENTER] again to confirm changes
3.
Press [MENU] to exit
5.3.3 Loop Recording
Set to enable/disable HDD video loop recording. When the internal hard drive is full
during video recording, the NVR will delete oldest files to release HDD space.
1.
Press [ENTER] button to go into “Loop Recording” menu. Default value in
“ON” marked with RED tick under the ON label
Default duration – 5 minutes
Change duration and press [ENTER] to confirm
Default status – display time
stamp in Live View
Select [OFF] to disable time stamp in Live
View, press [ENTER] to confirm
