digital radio technology 2.4 GHz
multifon WLAN outdoor cam M8GB-L
video security system with intercom
Art. no. 51088
Quick start operating instructions
Important
Prior to using the device for the first time, carefully and completely read through
all operating instructions. Detailed operating instructions are available for download:
http://stabo.de/fileadmin/BdA/BdA_stabo_multifon_WLAN_outdoor_cam
_M8GB_L_HomeViewPro_DE_EN.pdf
Simplified EU Declaration of Conformity
Hereby, stabo Elektronik GmbH declares that the radio equipment type
stabo WLAN
outdoor cam M8GB-L
is in compliance with the Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following Internet address:
http://stabo.de/fileadmin/DoC/DoC_stabo_multifon_WLAN_outdoor_cam
_M8GB_L_HomeViewPro_DE_EN.pdf
Scope of delivery
HD color camera with integrated WLAN module and PIR sensor
Power supply unit (9 V DC/2 A)
Quick start operating instructions (German/English)
Mounting material
Please check the contents of the package for completeness.
Prior to using the sets examine them with
respect to any external damage. In case
of an external damage, do not put the
product into operation, but contact your
specialist dealer immediately.
Commissioning and
installation
First download the iOS or Android
version of the app
HomeView
Pro
from the App Store or Google Play
Store according to the operating
system of your mobile device. To do
so, enter
HomeView
Pro
into the
search bar, mark the app, download
and install it.
Note:
In these operating instructions,
all operational steps are described
for the Android-version of the app.
Caution:
Do not yet connect the
camera to the power supply.
Connecting the camera to the mobile device
1.
Make sure that your mobile device is connected to your WLAN router.
2.
Open
HomeView Pro
and tap the
plus sign.
3.
Tap
Smart Config
.
4.
Enter your WPA encryption key under
Password.
.
5.
Plug the power supply unit into a socket (230 V) and connect the
plug to the DC IN socket of the camera. After aprox. 30 sec. the
green status LED on the camera starts flashing rapidly. Then tap on
Next.
6. The camera is now shown on the display. Enter the password
000000
and tap
Save
.
If the camera is not found or the installation process was aborted (the
green LED flashes slowly), unplug the power supply unit and restart
again from step 5.
7.
The message
Add New Camera Successfully
is displayed.
Confirm by pressing
OK
.
8.
Tap the camera symbol.
