stabo multifon security IV, Руководство пользователя

Страница: 48 / 52

48
For modifying settings, open the menu Edit Device, open Advanced to enter the submenu
Advanced Setting and tap the icon Alert Interval .
This option is used to specify the time interval for the push notifications (notification after having
detected one or several movements).
For deactivating the Push Notification function, select OFF.
Troubleshooting
No image: Is the monitor switched on and connected to the power supply?
Is the camera connected to the power supply? Is the camera out of the radius of reach? (If
necessary, reduce the distance between camera and monitor). Is the antenna attached to the
camera?
The image quality deteriorates: Reduce the distance between camera and monitor. Reposition
the camera and the monitor.
No audio signal or audio signal too weak/feedback: The microphone of the camera should
be positioned closer to the source of noise. Camera and monitor are too close to each other
(enlarge the distance).
The image is choppy: the devices work with a low frame rate. Reduce the distance between
camera and monitor. If necessary, eliminate the obstacles between camera and monitor.
When transmitting to a large TV, the image is coarse: This is not a defect, since the camera
resolution is VGA (680x480). You should activate the PIP function (Picture in Picture) on your TV
set or use a smaller screen instead.
Recording cannot be performed: No memory card in SD memory card slot. The memory card
is write-protected or not formatted.
The storage space available on the memory card is higher than 64 GB. The memory card is full.
Disposal instruction
Electric and electronic devices are not to be thrown into the domestic waste!
Please dispose devices that are out of order/used with the corresponding collecting point (e.g.
with your municipal waste disposal company)!