12
Installation
Installing Batteries
Camera:
1. Remove the battery cover at the back of the unit.
2. Insert AA size batteries according to the marking in the battery compartment.
3. Align the battery cover tabs with the camera tab holes and replace the cover.
Monitor:
1. Remove the battery cover at the back of the unit.
2. Insert AA size batteries according to the marking of the battery compartment.
3. Align the battery cover tabs with the monitor tab holes and replace the cover.
Please Note:
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard or rechargeable batteries. Do not use different brand of
batteries.
3. Remove the batteries during long period of non-use.
4. Due to specially designed circuitry for safety, only specially designed rechargeable battery can
be recharged. Please contact your dealer if you have any queries.
Installing AC/DC Adaptor:
1. Install the plug of AC adaptor to the DC jack of the unit.
2. Plug the AC adaptor into a standard wall AC power outlet.
3. Switch on the unit with the power ON/OFF switch.
4. The power indicator will be illuminated.
Warning:
Improper use of adaptor may cause malfunction of the units. Please consult your dealer
for any queries.
Please note that the service life of batteries is limited. Therefore, when monitoring over long
periods and, in particular, overnight, its recommended to use AC adaptors for both camera and
monitor unit.
Use only the AC adaptors supplied with the package.
Before plug in AC adaptors, please make sure only rechargeable NiMH batteries [or no battery]
are inside the battery compartment.
Recharging The Monitor Unit
Monitor of your 2.4 GHz Color LCD A/V Wireless Monitor have built-in battery recharging circuit.
Make sure only rechargeable NiMH batteries are inside the battery compartment before plug in
AC/DC adaptors.
The unit will be in recharging mode with the AC/DC adaptor plug in.
