stabo freetalk com II, Руководство пользователя

Страница: 17 / 24

17
Programmable lateral function keys SK1 and SK2
Two different functions can respectively be assigned to the two lateral function keys. Function 1
is activated or deactivated through a short keystroke on the respective the function key, function 2
through a long keystroke (the duration of the keystroke for activating function 2 can be adjusted
from 1 to 5 sec.).
Factory settings
Short keystroke Long keystroke (1.5 sec.)
SK 1 Monitor Scrambler
SK 2 Battery Power Check VOX
Important note: The factory settings can only be changed by programming procedure (programming
set optional).
Function listing for function keys 1 and 2
Short keystroke Long keystroke
OFF (no function assignment) OFF (no function assignment)
Monitor Monitor Momentary
Scrambler Scrambler
Battery Power Check Alarm
Whisper mode Battery Power Check
VOX Whisper mode
Compander VOX
Compander
Monitor
By briefly pressing function key 1 (factory setting) the squelch is permanently open (during free
radio communication). By pressing the key once again, the squelch is closed again.
By pressing the key when the pilot tone process (CTCSS/DCS) is activated, the receiver muting
is deactivated. Pressing the key once again leads to a new activation of the received muting.
Scrambler
Speech scrambling prevents that your transmission can be tapped without further auxiliaries by
unauthorized persons.
Through a long keystroke on the lateral function key 1 (factory setting), the scrambler function
is activated (announcement voice encrypt ON ). By pressing the key once again, the scrambler
function is deactivated (announcement voice encrypt OFF ).
Note: Enable this feature on all radio sets involved.
Battery Power Check
By briefly pressing the lateral function key 2 (factory setting and when the speech announcement
is activated), the capacity of the battery is checked. Depending on the state of charge, the announce-
ment p ower high (capacity of battery pack of 100 % - 65 %); p ower middle (65 % - 30 %), power
low (30 % - 10 %) or Please charge battery (5 % - 10 % = Please charge battery) sounds.
Battery-low warning
If the capacity of the battery pack drops to less than 10 %, the red status LED flashes and the
announcement Please charge battery sounds.
When pressing the PTT button now, an alarm tone sounds and transmission is impossible. Please
charge or change the battery pack.
Connecting an external (optional) VOX headset (whisper VOX)
Activate the VOX function through a long keystroke on the lateral function key 2 (factory setting);
announcement VOX ON .