Safety instructions for the charger
Do not place radio sets that are equipped with batteries (not
rechargeable) into the charger! There is explosion hazard!
The double tabletop charger must only be used for the charging of the
NiMH batteries that are included in the scope of delivery!
The charger must only be operated with the delivered power supply
unit. Do not abuse it as DC voltage source for other applications.
Prevent small metal parts from penetrating into the charger.
Do not disassemble neither the power supply unit nor the charger.
Disconnect the device from the mains if you do not use it.
Make sure that the radio sets are switched off during charging.
Only use the charger in closed rooms. Protect it from humidity, dust,
heat and strong vibrations.
Never throw the batteries into the fire. Never short-out the contacts of
the batteries!
Charging of the batteries in the charger
1. Plug the power supply unit into a 230 V socket.
2. Connect the power supply unit to the charger.
3. Switch off the radio sets!
4. Place the radio sets into the charging shaft.
The control lamps on the charger emit red light,
the batteries are now being charged.
The charging current of this battery charger is
adjusted to approx. 50 mA to 100 mA, the
charging time thus depends on whether you
want to charge
one
or
two
radios and on the
state of charge and the capacity of the batteries.
The tabletop charger does not switch off automatically. Be sure
to terminate the charging in time in order to avoid overcharging
of the batteries, as repeated overcharging reduces their lifetime.
Maximum charging times
With completely discharged batteries with a capacity of 600 mAh the
two radio sets (= 8 NiMH batteries) are fully charged after 12 - 14 hours.
25
