4
Installation
922 0594
924 0594
Vacuum
Regulator
Swivel
Assembly
Reducer
Cone
Hose
Swivel
Assembly
Long Hose Cuff
STEP 1:
Straighten Hose
Remove hose from box and lay it
out in the sun to straighten.
STEP 2:
Check Parts
Make sure you have
all parts to pool
cleaner.
STEP 4:
Assemble Cleaner
A. Insert swivel assembly into
cleaner body and twist 1/4
turn clockwise to lock.
B. Set brush adjuster to ‘0’.
C. Slide long hose cuff
over swivel assembly
to install hose.
STEP 5:
Submerge Cleaner
A. Start pump.
B. Turn cleaner upside down,
submerge, and feed hose down
side of pool wall to fill hose
with water.
STEP 3:
Clean System
A. While the hose is
relaxing, clean and
backwash your filter
system, skimmer and
pump baskets.
B. Close Main Drain if
your pool has one.
C. Start Pump.
