ST X-NUCLEO-OUT06A1, Руководство пользователя

Страница: 2 / 18

1 Getting started
1.1 Overview
The X-NUCLEO-OUT06A1 embeds the IPS1025H-32 intelligent power switch (IPS), featuring overcurrent and
overtemperature protection for safe output load control.
The board is designed to meet application requirements in terms of galvanic isolation between user and power
interfaces. This requirement is satisfied by an optical isolation implemented through three optocouplers (ISO1,
ISO2, and ISO3) for signal forward to the device and FLT pins for feedback diagnostic signals.
The expansion board features:
•
Based on IPS1025H-32 single high-side switch, which features:
– Operating range up to 60 V
– Low power dissipation (R
ON(MAX)
= 25 mΩ)
– Fast decay for inductive loads
– Smart driving of capacitive load
– Under-voltage lock-out
– Overload and over-temperature protection
– PSSO24 package
• Application board operating range: 8 to 33 V/0 to 5.7 A
• Extended voltage operating range (J3 open) up to 60 V
• Green LED for output on/off status
• Red LEDs for diagnostics (overload and overheating)
• 5 kV galvanic isolation
• Supply rail reverse polarity protection
• EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-8
• Compatible with STM32 Nucleo development boards
• Equipped with Arduino UNO R3 connectors
• CE certified:
–
EN 55032:2015 + A1:2020
– EN 55035:2017 + A11:2020
• RoHS and China RoHS compliant
1.1.1 Digital section
The digital section is associated with the STM32 interface and digital supply voltage to and from the X-NUCLEO-
OUT06A1 expansion board.
UM2866
Getting started
UM2866 - Rev 1
page 2/18