2
Board setup
To set up the board:
Step 1.
Connect the
X-NUCLEO-NFC08A1
expansion board to the
STM32 Nucleo
board from the top through
the Arduino UNO R3 connectors
Step 2.
Power the
STM32 Nucleo
board using a Mini-B USB cable
Step 3.
Program the firmware on the
STM32 Nucleo
board using the provided example
Step 4.
Reset the MCU using the reset button available on the
STM32 Nucleo
board.
The evaluation kit is ready to be used.
UM3007
Board setup
UM3007
-
Rev 1
page 4/18