DocID027622 Rev 2
5/21
UM1872
Getting started
21
2
Getting started
This section describes the hardware requirements for the X-NUCLEO-IDS01Ax evaluation
boards.
2.1
Hardware requirements
The X-NUCLEO-IDS01Ax is an expansion board for use with the STM32 Nucleo. To
function correctly, the X-NUCLEO-IDS01Ax must be connected to the STM32 Nucleo board
as shown in
Figure 2
below.
The STM32 Nucleo firmware and related documentation is available on www.st.com at
http://www.st.com/stm32nucleo
Figure 2. X-NUCLEO-IDS01Ax plugged to STM32 Nucleo board
The interconnection between the STM32 Nucleo and the X-NUCLEO-IDS01Ax has been
designed to permit the use of any STM32 Nucleo board, although complete testing has
been performed using the NUCLEO-L053R8 and NUCLEO-F401RE hosting the ultra-low
power STM32.
