ST X-NUCLEO-53L5A1, Быстрый старт

Страница: 10 / 24

Setup & Demo Examples
NUCLEO Kit driver installation
1. Connect the Nucleo pack to the PC through USB
•
Wait for the board to be recognized;
the drivers are installed automatically)
•
If Windows cannot install automatically the
STLINK driver, please follow step 2
2. Install the PC USB port driver to detect the Nucleo board
•
Called STSW-LINK009 , downloaded from www.st.com
• Unzip, extract the docs, and install “
stlink_winusb_install.bat
”
10
=> VL53L5CX nucleo kit is ready for GUI installation