4
Run X-CUBE-CELLULAR firmware
4.1
Functional content of the X-CUBE-CELLULAR Expansion Package
provides one application called
Cellular App
that allows user to send and receive data over
the TCP or UDP protocols with an Echo server. It also allows the use of a ping command to ping remote hosts. It
provides the throughput at the application level (not at the air interface).
4.2
Set the serial terminal configuration for X-CUBE-CELLULAR firmware
Start Tera Term, select the proper connection (featuring the
STMicroelectronics
name), and set the parameters
(the baud rate is different from the one referred to in
Section 3.2 Activate the eSIM (optional)
•
Terminal
–
[
New line
]
◦
[
Receive
]:
AUTO
◦
[
Transmit
]:
CR
–
[
Local echo
] selected
•
Serial
–
[
Baud rate
]:
115200
–
[
Data
]:
8 bit
–
[
Parity
]:
none
–
[
Stop
]:
1 bit
–
[
Flow control
]:
none
–
[
Transmit delay
]:
10 ms
each
4.3
Start X-CUBE-CELLULAR firmware
Restart the board by pressing the black reset button.
Traces are displayed on the serial terminal.
UM2567
Run X-CUBE-CELLULAR firmware
UM2567
-
Rev 4
page 6/12