ST VT5366, Руководство пользователя

Страница: 19 / 21

UM0257 General
19/21
4 General
4.1 How to use the VT5366
1. Turn the mouse on using the black sliding switch located on the bottom of the mouse.
2. Connect the receiver to the PC via USB cable provided.
3. Press the connect button on the receiver (SW1) and the connect button on the mouse
(at the same time). The mouse will now be connected.
4. The reset button on the mouse cycles the power of the mouse i.e., has the same affect
as turning the mouse off/on.
Figure 12. Connect/reset and power
4.2 RX/TX firmware
The VT5366 mouse/receiver firmware is available on request, please contact your normal
regional sales/support group.