3
Getting started
3.1
System requirements
•
An
expansion board
•
An
discovery kit
•
•
An
expansion board
•
A 3.3 V DC power supply
•
A USB Type-C™ cable
•
Two mini-USB ports
•
A programming cable (compatible with
)
•
A LAN cable to connect with the internet router, to keep the
and the Linux PC on the
same network
•
A Linux PC with a USB port
3.2
System setup
Step 1.
Check that the jumper on the
This jumper enables the write operation for the EEPROM.
Step 2.
to the
Figure 8.
X-STM32MP-IOT01A expansion board on top of the STM32MP157F-DK2
Step 3.
via the USB Type-C™ cable.
Step 4.
Program the supported firmware in the
.
The system is ready for use.
UM3039
Getting started
UM3039
-
Rev 1
page 9/23
