UM0213 - User Manual
Remote Control Protocols
15/25
A.2
RC5 Hot Key Configuration
shows the STFPC311 being configured to interface with the RC5 protocol-based
remote control.
The RC5 hot key addressing for STANDBY configuration is as follows:
●
RC Address: 0x00
●
Hot Key: STANDBY (code: 0x0C)
The RC5 protocol uses Bi-phase modulation Manchester encoding in which a low-to-high
transition represents a logic high signal, and a high-to-low transition represents a logic low
signal.
Note:
See
RC and HOTKEYS CONFIG Tab on page 11
for protocol information.
Figure 12.
RC5-based Remote Control STANDBY Configuration
www.BDTIC.com/ST
