ST STEVAL-ISB68WA, Руководство пользователя, Страница: 3 / 18

The terminals for the receiving coil, the output load and the control signals are summarized in Table 1 . The output
rail and the control interface are already made easily accessible by means of wires terminated with pin header
female connectors (
Figure 4 ).
Table 1. Receiver module terminals
Terminal Signal Wiring color
J1 AC input (RX coil) -
J2 AC input (RX coil) -
J3 VRECT (rectifier output) -
J4 Power return (ground) Black (P1)
J5 VOUT power output Red (P1)
J6 INT (digital output) Orange (P2)
J7 SCL (digital input) Yellow (P2)
J8 SDA (digital I/O) Green (P2)
J9 Signal ground Blue (P2)
Figure 3. Receiver module top and bottom silkscreen
UM2693
Wireless power receiver module
UM2693 - Rev 1
page 3/18