ST STEVAL-IPMM10B, Руководство пользователя, Страница: 20 / 34

8 Connectors, jumpers and test pins
Table 6. Connectors
Connector Description/pinout
J2
Motor control connector
1 - emergency stop
3 - PWM-1H
5 - PWM-1L
7 - PWM-2H
9 - PWM-2L
11 - PWM-3H
13 - PWM-3L
15 - current phase A
17 - current phase B
19 - current phase C
21 - NTC bypass relay
23 - dissipative brake PWM
25 - +V power
27- PFC sync.
29 - PWM VREF
31 - measure phase A
33 - measure phase B
2 - GND
4 - GND
6 - GND
8 - GND
10 - GND
12 - GND
14 - HV bus voltage
16 - GND
18 - GND
20 - GND
22 - GND
24 - GND
26 - heat sink temperature
28 - VDD_m
30 - GND
32 - GND
34 - measure phase C
J3
Motor connector
•
phase A
• phase B
• phase C
J4
VCC supply (20 VDC max)
•
positive
• negative
J5
Hall sensors / encoder input connector
1.
Hall sensors input 1 / encoder A+
2. Hall sensors input 2 / encoder B+
3. Hall sensors input 3 / encoder Z+
4. 3.3 or 5 Vdc
5. GND
J7
Supply connector (DC – 125V to 400 V)
1.
+ (positive terminal)
2. - (negative terminal)
Table 7. Jumpers
Jumper Description
SW3
TSO/NTC
TSO: jumper on 1-2
NTC: jumper on 2-3
UM2702
Connectors, jumpers and test pins
UM2702 - Rev 1
page 20/34