UM0277
Getting started
Figure 13.
Force debug tab
3.5.4 Parameter
measurements
The GUI can detect and display all the various parameters of the MCU, such as the
temperature order, the evaporator temperature, the AC load states, the compressor cycle
information (running period and duty cycle) and the Mains frequency. For more information,
refer to the “Help” menu of the GUI software.
To enable data acquisition, press the “Acquisition” button. If the acquisition is successful
(MCU firmware parameters and measurements obtained), the “ACQUISITION” LED turns
green. If the “ACQUISITION” LED remains OFF, the acquisition function is disabled. If red, a
samples acquisition error occurred.
