Figure 40.
BlueMS (Android version) plot data page
2.5
Streaming to an STM32 Nucleo board used as a receiver
Another possible demo to be performed using a STEVAL-BLUEMIC-1 evaluation board is the unidirectional voice
streaming from the evaluation board to an STM32Nucleo stack running the FP-AUD-BVLINK1 central application.
The audio can be acquired at 8 or 16 kHz of sampling frequency: the transmitter and the receiver must be
configured accordingly.(Refer to the relevant page on www.st.com to set up the central module to be used as a
receiver.)
UM2257
Streaming to an STM32 Nucleo board used as a receiver
UM2257
-
Rev 2
page 28/35
