ST ST25R3911B, Руководство пользователя

Страница: 6 / 25

Hardware UM2042
6/25 DocID029132 Rev 3
2 Hardware
The PCB (Printed Circuit Board) is connected via USB to the PC. The STSW-ST25R001 PC
software controls the STM32 MCU located on the PCB. The STM32 MCU (based on Arm
®
core) then operates the ST25R3911B via SPI.
The ST25R3911B is connected directly to the 5 V supply of the USB bus. An LDO converts
this voltage down to 3.3 V, to supply the microcontroller.
A green LED close to the USB plug indicates if the board is powered. Six blue LEDs indicate
the mode of operation (transmit / receive) and which technologies are in use.
The antenna runs along the PCB perimeter.
2.1 Block diagram
Figure 2 shows the functional block diagram of the board.
Figure 2. Functional block diagram
2.2 Schematics
As indicated in Figure 3 , the schematics can be split into four main parts
•
USB connectivity and power supply ( Figure 4 )
• STM32 MCU ( Figure 5 )
• ST25R3911B ( Figure 6 )
• Antenna and matching network components ( Figure 7 )
069
+RVW3&
(&0)
&0;
/'385
N+]
FU\VWDO
0+]
FU\VWDO
670/5( 675%
3&%
DQWHQQD
63,
0DWFKLQJ
QHWZRUN
9 9
86%
675%',6&2