Subject to change without notice!
2-60-006-00-00592_Rev. A_01/2015
Assembly
1. Ensure a safe work environment during assembly, maintenance and inspection operations. If necessary interrupt
the current supply of the primary conductor and take precautions against unintentional switching.
(i) For Window type CT : Bar or cable primary insert through primary cable or bus bar & fix it using mounting screw
H1-H2 : Direction of input power supply
X1-X2 : Direction of output power
2. Connect the secondary wires of the current transformer to the measuring device (ampere meter, energy meter).
Pay attention to the installation guide of the measuring device.
3. If necessary, start the current supply again.
4. Check whether the current transformer is assembled correctly and the secondary leads are connected properly.
L
N
H
1
H
2
X
1
X
2
R
L
A
Wiring diagram
Environmental instruction
When the product has reached it´s “end of life”, it must be recycled. Pass it to an electrical waste disposal. Do not
dispose as unsorted municipal waste!
This product was developed and manufactured in
accordance with the applicable regulations
(IEEE C57.13) and meets the requirements of the low
voltage guideline 2006/95/EG
Manufactured by:
Sifam Tinsley Instrumentation Inc
3105 Creekside Village Dr,
Unit 801, Kennesaw GA 30144
Distributed by:
Veracious Canada Inc
1101 Britannia Rd E,
Mississauga, ON L4W 3X1
Contact: +1 416-640-5364
Fax: +1 416-981-3933
E-mail: [email protected]
Web: www.veraciousinc.com
