Features
UM1956
6/35
UM1956 Rev 4
1 Features
•
STM32 microcontrollers in 32-pin packages
•
Three LEDs:
–
USB communication LED (LD1)
–
Power LED (LD2)
–
User LED (LD3)
•
Reset push-button
•
Board expansion connector:
–
Arduino
™
Nano
•
Flexible board power supply options:
–
ST-LINK USB V
BUS
–
External source
•
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:
mass storage, Virtual COM port, debug port
•
Support of a wide choice of Integrated Development Environments (IDEs) including
IAR
™
EWARM
(a)
, Keil
®
MDK-ARM
(a)
, GCC-based IDEs (including free SW4STM32
from AC6), Arm
®
Mbed™
(b), (c)
•
Arm
®
Mbed Enabled™ (see http://mbed.org)
a. On Windows
®
only.
b. Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and or
elsewhere.
c. Refer to the https://www.mbed.com website and to
Table 1: Ordering information
, to determine which Nucleo
board order codes are supported.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from