5
Quick start
The
STM8 Nucleo-32 board featuring the
affordable and flexible way for users to try out new concepts and build prototypes with an STM8S Series
microcontroller in an LQFP32 package.
Before installing and using the product, accept the Evaluation Product License Agreement from the
webpage.
For more information on the STM8 Nucleo-32 board and to access demonstration software, visit the
webpage.
5.1
Getting started
1.
Check jumper position onboard: JP1 (VDD) on [1-2] or [2-3] position.
2.
Connect the STM8 Nucleo board to a PC with a Type-A to Micro-B USB cable through the USB connector
CN1 to power the board. Then LED LD1 (COM) and red LED LD2 (PWR) light up, the green LED LD3
blinks.
3.
Remove the jumper placed between D2 (CN3 pin 5) and GND (CN3 pin 4).
4.
Observe how the blinking of green LED LD3 changes when the jumper is in place or removed.
5.
Download the demonstration software and several examples that help to use the STM8 Nucleo features.
These are available at the
product webpage.
6.
Develop your own applications using the provided examples.
UM2391
Quick start
UM2391
-
Rev 1
page 6/25
