DocID026814 Rev 1
35/52
UM1811
ADP menu
52
Figure 23. Effect of show routing table command
7.5 ADP
information
base attributes description
Here is a brief description for all the attributes of the ADP information base.
Table 8. ADP G.9903 information base attributes52
Standard G.9903 ADP information base attributes
adpSecurityLevel
The minimum security level to be used for incoming and outgoing adaptation
frames
adpPrefixTable
Contains the list of prefixes defined on this PAN. Note that it is assumed that the
link local IPv6 address exists independently and is not affected by the prefixes
defined in the prefix table
adpBroadcastLogTableEntryTTL Maximum time to live of a adpBroadcastLogTable entry (in seconds)
adpMetricType A metric type to be used for routing purposes
adpNumDiscoveryAttempts The number of discovery attempts
adpDiscoveryAttemptsWaitTime
Allows programming the maximum wait time between invocation of two
consecutive network discovery primitives (in seconds)
adpContextInformationTable Contains the context information associated to each CID extension field
adpCoordShortAddress Defines the short address of the coordinator
adpRLCEnabled Enables the sending of RLCREQ frame by the device
adpAddRevLinkCost
It represents an additional cost to take into account a possible asymmetry in the
link
