ST G3-PLC, Руководство пользователя

Страница: 31 / 52

DocID026814 Rev 1 31/52
UM1811 ADP menu
52
7.1 ADP root menu
The root menu offers the possibility to enter a payload and send it at the ADP layer, as
shown in
Figure 19 .
Figure 19. ADP root panel
The ADP root panel is composed of one single command:

ADPD-DATA.Request: request
s
IPv6 DATA transmission
Confirm and indication messages are automatically generated as explained in Section 3.4
on page 12 .
The following options are available in the panel:

Payload type: select
s
the hexadecimal or ASCII input mode for the NSDU

Payload content: free text window to enter the NSDU to be sent (note that the data has
to be a valid IPv6 packet)

Max Payload Size: check box to configure the maximum size for the random option

Generate Random: option to generate a random NSDU

NsduHandle: the handle associated with the NSDU to be transmitted

QoS : quality of the service for the NSDU (normal priority, high priority, contention free)

Discover Route option: if TRUE, a route discovery procedure will be performed prior
sending the ADP frame, as long as a route to the destination is not available in the
routing table. If FALSE, no route discovery is performed.