ST EVAL-L9001, Руководство пользователя

Страница: 8 / 15

6 Jumpers and connectors
Table 2. Jumpers
Name Description Type
J1
Expansion connector (Enable signal, Reset signals,
Watchdog)
Multi-pin connector
J2 Main battery positive connector (VB) Terminal
J3 VADC GND connector Terminal
J4 Watchdog disable
Solder jumper:
Closed (default) = Watchdog disabled
Open = Watchdog enabled
J5 VADC positive connector Terminal
J6 VDD1 positive connector Terminal
J7 VDD1 GND connector Terminal
J8 Main battery GND connector Terminal
J9 VDD2 GND connector Terminal
J10 VDD2 positive connector Terminal
Table 3. Expansion connector
Pin Description
1 ADCMON: VADC monitor flag (reset)
2 RSTN1: VDD1 monitor flag (reset)
3 RSTN2: VDD2 monitor flag (reset)
4 WAKE_EXT : Wake-up pin (to be > 3.25 V to enable power supply)
5
WDO: Watchdog output (output is driven low
in case of watchdog fault)
6
STBY: Standby input (The state can be entered by ACTIVE state by rising STBY pin. Depending on the
active VDD regulators (i.e. the regulators which have not been disabled in the application), the low power
mode is managed in a different way). Please refer to L9001 Datasheet for further information
7 WDI: Windows watchdog input. Please refer to L9001 Datasheet for further information
8 TWN: Thermal warning flag output
9 GND : Ground
UM2598
Jumpers and connectors
UM2598 - Rev 1
page 8/15