ST ARMIC30, Руководство пользователя

Страница: 30 / 35

Jumper settings UM0193
30/35
J25
GND connection to pin number 2 of the
8-bit Input/General Purpose connector
(J17)
When pins 1 and 2 are connected, the GND
supply is connected.
Otherwise, it is disconnected.
J26
+5V DC connection to pin number 1 of
the 8-bit Output/General Purpose
connector (J27)
When pins 1 and 2 are connected, the +5V DC
supply is connected.
Otherwise, it is disconnected.
J29
GND connection to pin number 2 of the
8-bit Output/General Purpose
connector (J27)
When pins 1 and 2 are connected, the GND
supply is connected.
Otherwise, it is disconnected.
1. For detailed information about Boot Selection modes, please refer to STR730 Reference Manual.
2. Please check the termination resistors values (R25, R26 and R28) for your RS-485 physical layer.
3. CAN bus is terminated by resistor R33 (120
Ω
).
Table 15. ARMIC30 jumper settings (continued)
Jumper Function Description